MONEL FASTENERS

Monel is a group of alloys whose primary composition consists of nickel & copper. The percentage of nickel in Monel Fasteners  ranges anywhere between  52% to 67%. Besides these two elements, Monel Fastener Manufacturers  add trace amounts of other elements like iron, manganese, carbon, and silicon.Monel Screws are stronger than pure nickel and the alloys used to produce Monel Rivet Nut  offers resistance to corrosion in a broad spectrum of chemicals and corrosive media.

Monel Bolt is readily fabricated by either hot-working and cold-working, machining, or welding. Although Monel Fasteners & Monel Bolts are very difficult to machine as compared to steel, since Monel work-hardens very quickly. Monel Fastener Manufacturers have to turn and work with the alloy at slow speeds and low feed rates. In comparison to stainless steel, the Monel Bolts Price is much more expensive, therefore the use of Monel has been limited to only these applications where it is impossible to replace them .

Other properties of Monel Bolts & Nuts includes, good hardness, toughness, ductility and excellent mechanical performance even at sub-zero temperatures.

SPECIFICATION OF MONEL FASTENERS
Material Monel Alloy Fasteners
Monel Fasteners ASTM / ANSI ASTM B865-04 / ASME SB865-04, ASTM B467 / ASME SB467
Grades of Monel Fasteners Alloy 400 Fasteners
Alloy K500 Fasteners
Size of Monel Fasteners M02 to M160
Length of Monel Fasteners 3 mm to 200 mm
Monel Fasteners Threads: BSW, UNC, BSF, UNF METRIC, or as required
M3, M14, M2.5, M2, M12, M5, M6, M4, M20, M16, M30, M24, M36, M8, M10 etc.
Monel Fasteners Standard: JIS, ASTM,BS, GB, DIN, IS, ISO
ANSI – American National Standards Institute

  • ASME B18.5
  • ANSI B 28.2.4 1M
  • Stud Bolt length are defined in ASME B16.5 standard
  • ANSI B 18.2.4 2M
  • Hex nuts are defined in ASME B18.2.2

DIN: DIN 931, DIN 970, 934 DIN DIN 933

UTS – Unified Thread Standard : NPTF, UNS, NPT, UNF, UNC, UNEF

ISO – International Organization for Standardization : ISO 4033 ,ISO 4032, JIS standards

Widely Use Monel Bolts Types Monel Hex Head Bolt, Hex Bolt, Square Bolt, Eye Bolt, T Bolt, U Bolt, Lag Bolt, Counter sunk Bolt etc.
Widely Use Monel Nut Types Monel Coupling Nut, Hex Head Nut, Wing Nut, Square Nut, Panel Nut, T Nut, Acorn Nuts, Dome Nut, Eye Nut, Lock Nut etc.
Widely Use Monel Screw Types Monel Threaded Screw, Hex Head Screw, Socket Head Screw, Socket Set Screw, Blind Rivet, Concrete Screw, Shoulder Screw, Anchor Screw, Panel Screw, Machine Screw etc.
Widely Use Monel Washer Types Monel Lock Washer, Machine Washers, Star Washers, Sealing Washer, Split Washer etc.
Widely Use Monel Studs Types Monel Double Ended Studs, Threaded Tod, Tie Bars, Tie Rodsetc.
Monel Fasteners In Form of: Square, Round, Threading as per Gauge,Round Etc.
Test Certificate of Monel Bolting : EN 10204 / 3.1
Finishing of Monel Fasteners: Zinc (yellow, white, blue, black), black oxide,
Dacroment, Geometry, nickel plated, anodizing, plated zinc-nickel, Stainless steel: Passivated
Bright Zinc Plated (BZP), Self-Colour, Hot Dip Galvanised (HDG), Stainless Steel, Sherardized,Mechanically Applied coating and some special one like DACROMET
Monel bolts Head drive: Six-Lobe, Phillips/Slot, Slotted, Phillips etc
Surface Coating of Monel Fasteners materials:
  • Xylon Fasteners
  • Cadmium Fasteners
  • Teflon Fasteners
  • Hot Dipped Galvanizing Fasteners
  • Phosphate Fasteners
  • Zinc Fasteners
  • Ptfe Coated Fasteners
  • All surface finishes can be supplied, including Nickel, Geomet , Zinc, Dacromet, Galvanised, Electroless Sherardized,& PTFE.
Packing of Monel Fasteners: In Bulk: pallet, Canton, Small Carton / Boxs / Pallet, or customer request
DIFFERENT TYPE OF MONEL BOLTS AVAILABLE
ASTM F467 MONEL ALLEN CAP BOLTS
ASTM F467 MONEL LAG BOLT
F467 MONEL ANCHOR BOLTS
F467 MONEL FLANGE BOLT
SF467 MONEL HEX BOLTS
DIFFERENT TYPE OF MONEL NUTS AVAILABLE
ASTM F467 MONEL LOCK NUTS
ASTM F467 MONEL T NUTS
MONEL NYLOC NUTS
MONEL NYLON INSERT NUT
MONEL SERRATED FLANGE NUTS